歡迎撥打24小時咨詢電話:181-0808-1710
線材拋丸清理機
本系列設備采用全防護無底坑設計,配置線材專用強力內置拋丸器,易損部件少,更換簡單快捷,生產效率極高,生產效率高,利用本機拋丸后的線材表面呈現均勻的粗糙度,增加鋁包銅包的附著力,使包層均勻永不脫落,消除線材拔絲過程中產生的內應力,增加線材表面的抗拉強度以及抗應力腐蝕開裂性能。
This series equipment uses all protects and the non-pit design,and is disposition wire rods special-purpose force built-in impeller heads,the wearing parts are few,the replacement is simple quickly,the production efficiency is extremely high.it presents even roughness of the wire rods surface after shot blasting.which increases an aluminum package of copper,causes the envelope even never fall off,eliminates the interval stress which in the wire rods when drawing process produces,increases the tensile strength as well as the anti-stress corrosion dehiscence performance of the wire rods’surface,obtains the permanence service life
技術參數 Technical parameters
名稱 | 線材拋丸清理機 | |
型號 | FQ II | FQ44H |
線材尺寸 | 5.5~Φ40 | Φ6~Φ24 |
處理速度 | MA×120 | 22~150 |
拋丸器數理 | 4 | 4 |
拋丸器功率 | 4×18.5 | 4×22 |
總功率 | 100 | 162.75 |
外形尺寸 | 3440×1575×3630 | 3200×1800×4500 |